BSA/375 Fundamentals of Business Systems Development 2016/2017

Learning Team Instructions Service Request SR-kf-013 Paper and Presentation (Preparation)Complete Service Request SR-kf-013.Develop requirements for the Kudler Fine Foods Frequent Shopper Program.Prepare a 12- to 16-page paper and a 10- to 12-slide Microsoft® PowerPoint presentation of the project, due in WeekFive. Assume that you are delivering the paper and presentation to an executive management committee. At aminimum, the paper and presentation must include the following:• Business objectives with supporting measures of success for the project• A description of the current business process or system• Identification of the scope or boundaries of the project• Project constraints, including finances, time, resources, and organizational policies or culture• Business functional requirements• Description of the new business process or system - Use the process objectives model and the system objectivesmodel.• Design requirements, including input or output design, interface design, data model, and network model• A cost-benefit analysisIndividual: Software Development PresentationRead the following scenario:• Senior management at your company is concerned about why so many software development efforts fail. They have asked you to develop a presentation that explains the activities that take place during each phase of the SDLC to ensure software development success.Create an annotated or narrated 7- to 10-slide presentation thatincludes the following:• An introduction slide• The activities that take place during each phase of the SDLC toensure successful software development• A conclusion slideLearning Team Instructions: Service Request SR-kf-013 Paper Review the Service Request SR-kf-013 for Kudler Fine Foods.Begin creating a detailed outline for each section of the paper.Draft the first 3- to 4-page section of the Service Request SR-kf-013 Paper, due in Week Five. Include the following:• Statement of scope and goals: Specify which functions will be included in the project. Identify the goals and includeaccomplishments, not a solution.• Supporting measures for success: Specify tangible measures for determining the relative degree of success of thecompleted project. The measures must correlate with the goals specified in the first section of this deliverable.• Summary of project feasibility: Include specific operational, technical, and economic feasibility analyses.Operational and technical issues should specify how each issue will be addressed. The economic analysis mustinclude quantified specific benefit and cost areas.• Current business process summary: Provide a flowchart and a separate high-level logical data flow diagram of thecurrent process.• Proposed system requirement list: List specific individual requirement needs in measurable and objective terms.Individual: Service Request SR-rm-022, Part 1The final individual paper for this class includes three sections: one section of the paper is due each week; the final section is due in Week Four.Complete Section 1 of the Service Request SR-rm-022 paper. Using the Service Request SR-rm-022, analyze the HR system.Prepare a 4- to 6-page paper that accomplishes the following:• What key stakeholders in Riordan Manufacturing would you gather requirements from?• Describe the information-gathering techniques and systems analysis tools you would propose for the project.• Identify the key factors that help ensure the information required for the project is gathered successfully.• Explain what project scope is and why it is important. Describe the areas of project feasibility that are examined in the analysis phase of the SDLC.Learning Team: Service Request SR-kf-013 Paper (Preparation)Draft the next 3- to 4-page section of the Service Request SR-kf-013• Determination of requirements: Identify specific analysis methods used to determine user needs.• List of confirmed requirements: Categorize each system requirement identified for the Week Two milestone as mandatory or optional.• Proposed system process view: Provide a flowchart of the proposed process.• Functional allocation modeling: Specify how each proposed system function would be allocated in terms of the required hardware, software, and Human-Computer Interface (HCI).• Logical model of the system: Provide a high-level logical data flow diagram of the proposed system.Individual: Service Request SR-rm-022, Part 2Complete Section 2 of the Service Request SR-rm-022 paper. This week's assignment incorporates the transition from analysis to design.Consider revising Section 1 based on faculty feedback.Prepare a 3- to 4-page paper that includes the following:• Describe the application architecture and process design. Include a high-level description of the security controls you recommend for the design of this HR system.• Apply the tools of systems analysis to describe the information system's architecture in terms of data, processes, interfaces, and network. Use Microsoft® Visio® or another diagraming tool to draw examples of flow charts, data flow diagrams, and any other design tools.Learning Team: Service Request SR-kf-013 Paper (Preparation)Draft the next 3- to 4-page section of the paper, due in Week Five.Include the following:• Preliminary design model: Provide a diagram that illustrates the overall logical information architecture.• Design trade-off approach: Specify the tradeoffs among cost,schedule, and performance. For example, a fast, inexpensive solution may not address performance requirements adequately.• Detailed design process and design specifications: Specify separate recommended decisions for software design, hardware, and networks.Include resolution of HCI considerations.• Physical model of the system: Illustrate the recommended decisions in information architecture diagramsIndividual: Service Request SR-rm-022, Part 3As one of the program outcomes for the Bachelor of Science inInformation Technology program, students must apply the principles of systems analysis and design to fundamental business systems within the organization.Complete Section 3 of the Service Request SR-rm-022 paper. This section incorporates the transition from design to implementation.Consider revising Sections 1 and 2 based on faculty feedback.Prepare a 4- to 6-page paper that accomplishes the following:• Describe the implementation stage for this project.• Include a discussion of the six major activities for the implementation stage as described in the text:• Coding• Testing• Installation• Documentation• Training• Support• Describe in the discussion of these six activities how each activity would be specifically planned for the individualproject situation.• Discuss the benefits of using defined and repeatable processes for accomplishing these activities for theimplementation stage.Learning Team: Service Request SR-kf-013 PaperDraft the final 3- to 4-page section of the paper.Include the following:• Testing process summary: Define a test plan or script that identifies major software functionality and hardware to be tested with the required outcomes.• Installation process and training plan summary: Provide a time line that identifies the specific steps--including training--and related resources required to implement the recommended system. Include a narrative explanation that discusses the effects of project constraints,such as time and conversion method, and include a description of the recommended training plan.• Documentation plan summary: Specify and explain each type of documentation required for ongoing technical and user support for the proposed system.• Support and maintenance plan summary: Provide a plan thatoutlines responsibilities and related resources--software, hardware, and networks--necessary to support and maintain the proposed systemLearning Team: Service Request SR-kf-013 Presentation