Titanium(IV) complexes as direct TiO2 photosensitizers

Share Embed


Descrição do Produto

This article appeared in a journal published by Elsevier. The attached copy is furnished to the author for internal non-commercial research and education use, including for instruction at the authors institution and sharing with colleagues. Other uses, including reproduction and distribution, or selling or licensing copies, or posting to personal, institutional or third party websites are prohibited. In most cases authors are permitted to post their version of the article (e.g. in Word or Tex form) to their personal website or institutional repository. Authors requiring further information regarding Elsevier’s archiving and manuscript policies are encouraged to visit: http://www.elsevier.com/copyright

Author's personal copy Coordination Chemistry Reviews 254 (2010) 2687–2701

Contents lists available at ScienceDirect

Coordination Chemistry Reviews journal homepage: www.elsevier.com/locate/ccr

Review

Titanium(IV) complexes as direct TiO2 photosensitizers ˙ Wojciech Macyk a,∗ , Konrad Szaciłowski a,b , Grazyna Stochel a , Marta Buchalska a , Joanna Kuncewicz a , Przemysław Łabuz a a b

Wydział Chemii, Uniwersytet Jagiello´ nski, ul. Ingardena 3, 30-060 Kraków, Poland ˙ Akademia Górniczo-Hutnicza, Wydział Metali Niezelaznych, al. Mickiewicza 30, 30-059 Kraków, Poland

Contents 1. 2.

3.

4.

5.

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2688 Titanium(IV) surface complexes—structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2688 2.1. Surface of titanium dioxide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2688 2.2. Monodentate complexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2689 2.2.1. Alcohols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2689 2.2.2. Phenols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2689 2.3. Bidentate complexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2689 2.3.1. Monocarboxylic aliphatic acids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2689 2.3.2. Dicarboxylic aliphatic acids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2689 2.3.3. Ascorbic acid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2690 2.3.4. Catechol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2690 2.3.5. Benzoic acid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2690 2.3.6. Phthalic acid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2690 2.3.7. Salicylic acid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2691 2.3.8. Gallic acid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2691 2.4. Polynuclear complexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2691 Titanium(IV) surface complexes—electronic structure and photosensitization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2692 3.1. Electronic structure of neat titanium dioxide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2692 3.2. Quantum-mechanical description of molecule–semiconductor interactions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2692 3.3. Computational studies on surface TiIV complexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2694 Photoreactivity of titanium(IV) surface complexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2697 4.1. Photoelectrochemistry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2697 4.2. Photocatalysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2699 Potential applications and perspectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2699 Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2700 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2700

a r t i c l e

i n f o

Article history: Received 14 October 2009 Accepted 30 December 2009 Available online 7 January 2010 Keywords: Titanium(IV) complexes Titanium dioxide Photocatalysis Photoinduced electron transfer Photosensitization

a b s t r a c t Titanium dioxide photosensitization may be achieved in various ways, involving surface modification with appropriate species. The photosensitization process requires a visible light-induced electron or hole injection into conduction or valence band, respectively. Efficiency of this process depends on electronic interaction between the photosensitizer moiety (surface complex) and TiO2 particle. At least two types of the charge injection mechanisms may be distinguished—in the first, charge is transferred from the excited state of the sensitizer molecule to the conduction or valence band while the second mechanism involves a direct molecule-to-band charge transfer (MBCT). The MBCT process can be realized by surface titanium(IV) complexes with various organic and sometimes inorganic ligands. Catechol, phthalic acid or salicylic acid derivatives, as well as cyanometallate anions, upon chemisorption at TiO2 surface constitute an especially interesting group of ligands to yield various titanium(IV) surface complexes. Geometry of these complexes, electronic structures and possibility of their use as photosensitizers of TiO2 are discussed on the basis of experimental data and quantum-chemical modeling. Also prospective applications of photoinduced electron transfer and photocatalytic activity of such systems are presented. © 2010 Elsevier B.V. All rights reserved.

∗ Corresponding author. Tel.: +48 12 6632005; fax: +48 12 6320515. E-mail address: [email protected] (W. Macyk). 0010-8545/$ – see front matter © 2010 Elsevier B.V. All rights reserved. doi:10.1016/j.ccr.2009.12.037

Author's personal copy 2688

W. Macyk et al. / Coordination Chemistry Reviews 254 (2010) 2687–2701

1. Introduction Modern photochemistry of coordination compounds seems to have left homogeneous solutions and now focuses on the photochemistry at interfaces [1]. Increasing efforts in constructing efficient solar cells or photocatalysts activated by solar or – even better – visible light, forced researchers to focus on photochemistry at surfaces of solids, particularly semiconductors. Adsorbed or chemisorbed transition metal complexes may alter the electronic structure (and hence spectroscopic and redox properties) of wide band gap semiconductors [2,3]. The surface modification of TiO2 also influences quantum yields of photoinduced electron transfer processes. In particular, photosensitization of titanium dioxide gains a great attention since this material finds applications as a photoactive material in photovoltaics (dye sensitized solar cells; DSSC), optoelectronics (photoswitchable logic gates) and photocatalysis (water, air, surface detoxification and disinfection) [4–7]. Surface complexes playing the role of TiO2 photosensitizers are usually constituted of a transition metal ion with inorganic or organic ligands. In the latter case the ligands are coordinatively bound to the central ion and covalently linked to the titanium dioxide surface via various anchors (e.g. hydroxyl, carboxyl, amino and other groups). Inorganic ligands (e.g. CN− , F− , PO4 3− ) can also play the role of bridges between surface titanium and metal centers. The photosensitization effect is based on the photoinduced electron injection from the surface complex to conduction band (CB) of the semiconducting support. Alternatively, a hole might be injected to the valence band (VB). Photoinduced charge injection can be realized as a so called direct or indirect photosensitization. These processes are based on optical electron transfer (OET) and photoinduced electron transfer (PET), respectively. In the former case the excited state of the photosensitizer can be described as an oxidized surface moiety and reduced titanium center since titanium(III) can be considered as a trapped electron in the conduction band of TiO2 [8]. On the other hand, the indirect photosensitization is a multistep process involving generation of an excited state of the surface complex and consecutive charge transfer to the appropriate band of a semiconductor. The direct photosensitization should result in a more efficient electron transfer to the conduction band, however, the back electron transfer process might also be facile. Indirect photosensitization in general is characterized by a lower efficiency of the electron injection, but the back electron transfer is hindered due to an energy barrier. Further differences between these types of photosensitization will be discussed in next paragraphs of this paper. A specific class of surface complexes formed at titanium dioxide comprises titanium(IV) complexes synthesized upon chemisorption of organic ligands onto titania. Similar moieties used as anchoring groups binding external complexes to the surface may be regarded themselves as ligands. Surface species of [ Ti–L] type can be easily formed. Ligand-to-metal charge transfer (LMCT) in this case is equivalent to the injection of electron to the conduction band—in both cases the TiIII species is generated. Therefore in such situation the photoinduced charge transfer can be described as ligand-to-band charge transfer (LBCT) instead of LMCT. An effective photosensitization of titanium dioxide by such complexes can be achieved only under certain circumstances: (i) the energy of LBCT is lower than the band gap energy of TiO2 (OH links between titanium centers [16,18,19]. Titanium with four oxo ligands forms ‘C’ sites at the edges and corners of crystals [15,19]. Remaining coordination sites can be occupied by other ligands (H2 O, OH− ). The ‘C’ sites show a strong Lewis acidity due to two available coordination sites. All sites of titanium dioxide undergo surface protonation and deprotonation reactions, however, mainly sites with surface titanium ion are susceptible to surface complexation with external ligands [19]. The chemisorption of organic compounds occurring at the TiO2 surface may be considered as a Lewis and/or Brönsted acid–base reaction [20]. Donor groups containing oxygen, nitrogen or sulfur atoms may act as a Lewis base and donate electrons to the Lewis acids (surface TiIV ) [12]. The structure and stability of surface complexes of titanium(IV) are determined by type of TiO2 crystal plane, accessibility of titanium ions, type of ligating sites of organic ligands, pH, etc. Three basic structures of simple surface complexes can be distinguished: (i) monodentate structure with the organic ligand occupying one coordination site of tita-

Fig. 1. Three types of Ti sites at titanium dioxide surface: ‘A’—green, ‘B’—blue, and ‘C’—red.

Author's personal copy W. Macyk et al. / Coordination Chemistry Reviews 254 (2010) 2687–2701

2689

by inability of phenol and 4-chlorophenol to form ring-structured surface complexes (vide infra—bidentate complexes). 2.3. Bidentate complexes The formation of bidentate surface complexes is possible only if the ligand possesses at least two donor groups, or one group containing two donor atoms. The possibility of bidentate structures formation does not exclude monodentate complexation mode nor physisorption.

Fig. 2. Types of titanium(IV) surface complexes structures: monodentate—green, bidentate chelating—blue, and bidentate bridging—red.

nium; (ii) bidentate chelating structure with the ligand occupying two coordination sites; (iii) bidentate bridging structure composed of chelating ligand binding two neighboring Ti centers (Fig. 2) [21]. The first group comprises also polynuclear complexes with bridging ligands binding not the neighboring titanium ions but titanium and other metal ions. Not every surface Ti site is prone to be involved in each type of structure, for instance titanium centers bound with five oxo ligands can form monodentate or bridging structures while the formation of a bidentate chelating complex requires substitution of one oxo ligand. In the next paragraphs the structures of surface Ti complexes with various organic ligands (mainly O-donors) are presented. 2.2. Monodentate complexes 2.2.1. Alcohols The interaction of aliphatic alcohols with titanium dioxide surface is broadly studied mainly because of its great influence on photocatalytic processes occurring in the presence of these molecules. Simple aliphatic alcohols, such as methanol, ethanol, 1- and 2-propanol undergo physical (molecular) and chemical adsorption through hydroxyl group at the titanium dioxide surface [22,23]. In the case of ethanol, the physical and chemical adsorption was confirmed by 13 C cross-polarization MAS NMR measurements [24,25]. 13 C-MAS experiments indicated dissociative chemisorption of ethanol leading to formation of multiple surface complexes [24]. It was proposed that ethoxide species are attached to the surface sites characterized by different electronic environments. Similarly the formation of different 2-propoxide species upon the dissociative adsorption of 2-propanol on TiO2 surface at different sites was observed [26]. More detailed characterization of the adsorbed ethoxide species was performed basing on XPS (X-ray Photoelectron Spectroscopy) and TPD (Temperature Programmed Desorption) measurements [27]. Two different types of adsorbed ethoxy surface complexes were proposed: the ethoxy group bound to the surface Ti sites and ethoxy moiety attached to the surface “bridging oxygen” vacancy. Dissociative adsorption of simple aliphatic alcohols, however, does not influence significantly spectroscopic properties of complexed TiO2 . 2.2.2. Phenols Phenol as well as 4-chlorophenol has a moderate affinity to the TiO2 surface [15,28]. Diffuse reflectance IR spectroscopy and FTIR measurements confirmed a very weak chemisorption of phenol at TiO2 surface occurring with the formation of phenolate adsorbate [29,30]. The formed complexes are characterized by low stability constants. The observed weak chemisorption may be explained

2.3.1. Monocarboxylic aliphatic acids Carboxylic acids are well known for their complexation ability and therefore carboxyl groups are commonly used anchors chosen for covalent binding of any organic or inorganic molecules. Binding at ‘A’ and ‘C’ sites may lead to formation of titanium(IV) complexes [31]. The interaction of RCOOH with TiO2 surface occurs often through the acid dissociation and exchange of surface hydroxyl groups with carboxylate anions (formation of RCOO–Ti bond). Formic acid is often treated as a simple model molecule in experimental and theoretical studies of the RCOO–Ti bond formation. It undergoes a dissociative adsorption at the TiO2 surface [9,12,32]. Several experimental studies [32] (FTIR, Raman spectroscopy) as well as theoretical calculations [9,12,32] (DFT) have shown that formate anion binds to titanium dioxide surface (rutile (0 1 1) and (1 1 0) planes and anatase (1 0 1) plane) creating mainly bidentate bridging complex, where each oxygen atom of –COO− group is attached to two adjacent surface Ti sites while dissociated proton is transferred to a surface oxygen site. A monodentate configuration is less favored mode—in this case one of the oxygen atoms is bound to a surface titanium site while the other is supposed to interact with a surface hydroxyl group (‘B’ site). The bidentate chelating coordination appears to be thermodynamically unstable. Other aliphatic monocarboxylic acids, e.g. acetic acid [11,12,32] also show a tendency to dissociative adsorption onto the TiO2 surface (rutile (0 1 1)) with formation of bidentate bridging complexes as the most stable configuration [11,32]. Chemisorption of formic, acetic and citric acids (tricarboxylic acid) was observed only in suspensions at pH providing at least partially hydroxylated surface (pH < 7). 2.3.2. Dicarboxylic aliphatic acids Organic acids with adjacent carboxyl groups can interact with TiO2 surface forming surface complexes that may be different from those favored in the case of monocarboxylic acids. In general dicarboxylic acids form more stable surface complexes as compared to monocarboxylic acids [17]. Oxalic acid is the simplest example of a dicarboxylic acid. This model compound undergoes a strong dissociative adsorption onto the TiO2 surface [17,33]. Several studies (ATR-FTIR) have proven that strong inner-sphere surface complexes are generated [21,33,34]. Three different structures of these surface species were proposed: bidentate chelating [21,33–35] and/or bidentate bridging [20,21,33,36] where two oxygen atoms of each carboxyl group are attached to the same or adjacent Ti atoms while two remaining oxygen atoms are turned away from the surface (Fig. 3), and monodentate (protonated adsorbed oxalate and/or strongly hydrogen-bonded oxalate or protonated oxalate) which may appear at low pH [21,33–35,37]. The surface ring structures are considered as more favored which is in agreement with theoretical calculations proving that a bidentate bridging complex formed at the anatase surface is the most stable form of the adsorbed oxalic acid [20]. Other dicarboxylic aliphatic acids, malonic and succinic acids, adsorb in a different manner. Although surface complexes configurations for both compounds are not completely proven there is

Author's personal copy 2690

W. Macyk et al. / Coordination Chemistry Reviews 254 (2010) 2687–2701

Fig. 3. Types of TiO2 -oxalate surface complexes: bidentate chelating (I), bidentate bridging (II) and proposed monodentate structures (III): protonated adsorbed oxalate (a), strongly hydrogen-bonded oxalate (b) or protonated oxalate (c).

an evidence (ATR-FTIR) that structures of the adsorbed species of these two compounds do not involve C O bonds. It is proposed that malonate and succinate can form three different surface complexes: monodentate structures stabilized with hydrogen bonds, bidentate chelating structure (four-member ring) and bidentate bridging structure (five-member ring). Every bidentate structure involves both oxygen atoms of each carboxyl group [21]. 2.3.3. Ascorbic acid Ascorbic acid may also act as an electron-donating ligand. FTIR studies on adsorption of vitamin c on the nanosized titanium dioxide surface confirmed the formation of bidentate surface complexes [38,39]. In the case of nanosized TiO2 surface having a certain amount of undercoordinated sites (“corner defects”; Ti O) chelating structure of surface species is favored. The ascorbic acid binds to surface Ti sites through both hydroxyl groups of the five-membered ring. 2.3.4. Catechol Benzene derivatives with hydroxyl or carboxyl groups form very stable chelates with TiO2 surface. Usually the complex formation involves replacement of TiO2 surface hydroxyl groups by deprotonated ligands [16,40]. Catechol, a diprotic weak acid (pKa1 = 9.2; pKa2 = 13.0), forms stable complexes with TiIV [16,18]. The interaction of catechol molecules with TiO2 surface (surface Ti ions) resembles the interaction of catechol with TiIV in solution [16,41]. Catechol adsorbs dissociatively at the titanium dioxide surface through the deprotonated hydroxyl groups [41,42]. Results of the experimental studies (FTIR [43], ATR-FTIR [37,41], adsorption isotherm studies [16,41], UPS (UV photoemission spectroscopy), STM [13]) have proven formation of the ring-structured surface complexes. On the basis of IR measurements two types of possible surface species were proposed: bidentate chelating, and bidentate bridging structures [16,37] since IR spectra do not differentiate these structures [37,41,43]. However, STM measurements combined with theoretical calculations have proven that in the case of catechol adsorption onto a rutile (1 1 0) surface, bidentate bridging complexes predominate. This form seems to be favored because of a similar distance between catechol groups and adjacent surface Ti centers [16]. Moreover, it was demonstrated that at higher concentrations of catechol two kinds of packing of adsorbed molecules may be formed: one involving H-bound monodentate complexes (with partially dissociated catechols) and the second one consisting of a mixture of H-bound monodentate and bidentate structures. In both cases hydrogen bonds are formed between the hydroxyl group of one catechol molecule (partially dissociated) and oxygen of the neighboring catechol molecule determining the left/right tilted configuration of these structures (Fig. 4) [13]. The monodentate complexes, however, do not introduce additional electronic states into the band gap of titanium dioxide, as proposed for bidentate species. Another computational study focused on the interaction of catechol with anatase-TiO2 nanoparticles has shown that dissociated catechol molecules may coordinate to the defect Ti O surface sites leading to formation of very stable bidentate chelat-

Fig. 4. Left/right tilted configuration of H-bound monodentate complexes with partially dissociated catechol ligands (I) and with a mixture of H-bound monodentate and bidentate structures (II).

ing surface complexes [10]. This type of defect occurs frequently at the surface of anatase nanoparticles. It was also proposed that bidentate chelating surface species are more favored than bidentate bridging complexes on (1 0 1) anatase plane. These results are in agreement with FTIR studies [39], confirming bidentate binding between ortho-hydroxyl groups and the TiO2 surface. 2.3.5. Benzoic acid Benzoic acid, compared to aliphatic carboxylic acids, adsorbs to a very little extent at the titanium dioxide surface (e.g. for anatase no adsorption [44] or a very weak adsorption [15] was reported basing on UV–vis spectroscopic measurements). CIR-FTIR (cylindrical internal reflection-FTIR) studies allowed to confirm the mechanism of dissociative adsorption of this molecule onto the anatase surface [44]. Results of these studies suggest that benzoic acid is attached to TiO2 surface through two oxygen atoms of carboxyl group bound to one surface titanium(IV) ion (more likely) or two adjacent Ti centers. However, on the basis of STM, ESDIAD (electron stimulated desorption ion angular distribution) and LEED (low energy electron diffraction) measurements the bidentate bridging structure of the surface complexes (at the (1 1 0) plane) is more favored [45]. 2.3.6. Phthalic acid Phthalic acid strongly chemisorbs onto TiO2 surface. Dissociative adsorption results in formation of stable ring complexes. Two different structures of these surface species are proposed: bidentate bridging where complexation of two Ti sites (‘A’ sites) occurs through two oxygen atoms of the same carboxyl group, and a more probably bidentate chelating structure with two oxygen atoms of both carboxyl groups attached to one surface Ti ion (‘C’ site; Fig. 5)

Fig. 5. Proposed structures of TiO2 -phthalate complexes: bidentate bridging via one carboxyl group (I) and bidentate chelating involving two oxygen atoms from both carboxyl groups (II).

Author's personal copy W. Macyk et al. / Coordination Chemistry Reviews 254 (2010) 2687–2701

2691

Fig. 6. Types of TiO2 -salicylate complexes: bidentate chelating (I), bidentate bridging (II), and monodentate (III) structures.

[40,44]. Because of steric reasons other isomers of phthalic acid (isoand tere-) bind to two adjacent TiIV surface sites ‘A’ forming bidentate bridging complexes. In the case of terephthalate (p-phthalic acid) complexation leads to a flat geometry in which the aromatic ring is parallel to the surface [40]. 2.3.7. Salicylic acid Salicylic acid, similarly to catechol, shows a great affinity to TiIV ions in solution and chemisorbs efficiently at the titanium dioxide surface. It adsorbs dissociatively forming a surface titanium complex involving both carboxyl and hydroxyl groups [17,34,44]. Two structures of the surface complexes are proposed: bidentate chelating [17,19,34,44] (structure I, Fig. 6) and less stable bidentate bridging, structure II, (or monodentate through the oxygen atom of carboxyl group, structure III) [19,34]. FTIR studies on the complexes formed at the surface of nanosized TiO2 also confirmed presence of bidentate bonding [39]. In that case the bidentate chelating structure (structure I) is proposed. However, IR measurements are not sufficient to enable a complete distinction between these two surface ring structures, as in the case of oxalic acid or catechol. 2.3.8. Gallic acid The ATF-FTIR studies proved that interaction between gallic acid (3,4,5-trihydroxybenzoic acid) and titanium dioxide surface leads to formation of inner-sphere ring surface complexes [41]. Gallic acid adsorbs at the TiO2 surface through the complexation of two hydroxyl groups. In contrast to the salicylic acid, the carboxyl group is not involved in the surface complexation. 2.4. Polynuclear complexes Various organometallic complexes of transition metals may be bound to the surface titanium centers through anchoring groups. As described above carboxyl groups can play the role of anchors. In this way a polynuclear complex is formed with bridging ligands capable of coordination to both TiIV and other metal ions (for instance RuII [4,5,46,47], PtII [48], OsII [47,49], etc.). These structures, however, offer relatively long bridges between two metal ions constituted of many bonds. Although several of these complexes photosensitize TiO2 effectively, as in the case of Ti–LL–Ru moieties used in dye sensitized solar cells, the electron photoinjection to the conduction band is a multistep process—generation of the excited state of the complex (usually MLCT excitation) is followed by the electron transfer to the conduction band. A similar situation takes place for Ti–O–Pt structures formed upon [PtCl6 ]2− chemisorption at the titanium dioxide surface [50–53]. Although the bridging ligand is small the electron injection to the conduction band comprises two consecutive steps, i.e. LMCT excitation within platinum(IV) moiety and electron transfer. The mechanism of indirect photosensitization (electron injection to the conduction band of TiO2 or electron transfer to TiIV from the excited state of photosensitizer) differs significantly from that of the direct one observed for simple surface complexes of titanium(IV) in which ligand-to-titanium charge transfer plays a predominant role [8]. Since titanium complexes participating in the direct photosensiti-

zation are in the scope of this paper the other structures will not be described in detail. A nice example of a polynuclear surface complex constituted of titanium(IV) and another metal ion participating in the direct sensitization of titanium dioxide is formed upon adsorption of hexa- or pentacyanoferrates(II) onto TiO2 surface. In the case of [Fe(CN)6 ]4− complex [54] and [Fe(CN)5 L]3− (L = NH3 , H2 O, thiodiethanol, thiodipropanol, dimethyl sulfoxide, etc.) [55,56] formation of Ti–N C–Fe bridges takes place (Fig. 7). The reaction of hexaand pentacyanoferrates with the surface of titanium dioxide crystals can be regarded as a nucleophilic substitution reaction with titanium ions playing the role of central ions and cyanoferrate anions acting as ligands. The formed binuclear complexes are characterized by a broad MMCT absorption band in the visible range that can be described as MBCT (molecule-to-band charge transfer) when titanium(IV) ion belongs to the TiO2 matrix [55]. The same absorption bands are observed upon mixing aqueous solutions of pentacyanoferrates with colloidal solutions of titanium dioxide nanocrystals. In both cases the MMCT bands are broad and extend to 600–650 nm, except for the dimethyl sulfoxide complex, which exhibits only a very weak sensitization towards visible light. The most probable mode of [Fe(CN)5 L]3− binding is that via the axial cyanide ligand, as demonstrated by quantum-chemical calculations [55]. This mode is predominant especially in the case of a bulky sixth ligand [56]. Interesting systems were described by Yang et al. [57]. The authors studied photosensitization of titanium dioxide by chemisorbed [Fe(LL)(CN)4 ]2− complexes, where LL = bpy (2,2 bipyridine), dmb (4,4 -dimethyl-2,2 -bipyridine), or dpb (4,4 diphenyl-2,2 -bipyridine). Electronic spectra of formed surface [Ti]–NC–Fe(LL)(CN)4 species show both MLCT and MBCT (described also as MPCT, metal-to-particle charge transfer) bands. Either MLCT or MBCT excitation results in the electron injection to the conduction band of TiO2 . The quantum yield for the MLCT process was environment dependent. The described surface modification constitutes a good example of system with competing direct and indirect photosensitization modes.

Fig. 7. Binuclear complex of pentacyanoferrate(II) with titanium(IV) formed upon chemisorption of a corresponding ferrate anion onto the surface of TiO2 .

Author's personal copy 2692

W. Macyk et al. / Coordination Chemistry Reviews 254 (2010) 2687–2701

of the conduction bands [59]. This electronic structure renders titanium dioxide especially suitable for photoinduced electron transfer studies and with appropriate ligands may form complexes with strong electronic coupling. Other wide band gap semiconductors of similar band gap and band edge potentials show very different band structures (e.g. ZnO and SnO2 ). While the conduction band of TiO2 is comprised mainly from empty d orbitals of Ti4+ ions, the conduction bands of other similar semiconductors are comprised of empty s and p orbitals of Zn2+ and Sn4+ ions. Comparing these types of bands, d bands are typically narrower and have densities of states that are orders of magnitude higher than sp bands [60]. Furthermore, the lower part of the conduction band in TiO2 consists of d orbitals of t2g symmetry, which is assumed to allow stronger electronic coupling with the electron-donating moieties [61]. The contribution of oxygen 2p orbitals to the conduction band and titanium 3d orbitals to the valence band indicates strong interactions between Ti and O atoms and is a clear evidence of a strong covalent bonding between titanium and oxygen atoms. As a result, the excitation across the band gap involves both the O 2p and Ti 3d states [62].

Fig. 8. Density of states for rutile and anatase modification of TiO2 as calculated using DFT method [58]. Dashed and dotted lines represent partial density of states for titanium 3d and oxygen 2p orbitals, respectively. Reproduced from Ref. [58] with permission. Copyright American Chemical Society 2003.

3. Titanium(IV) surface complexes—electronic structure and photosensitization 3.1. Electronic structure of neat titanium dioxide The total and partial densities of states of anatase and rutile polymorphs of titanium dioxide are shown in Fig. 8. The main contribution to the valence band involves oxygen 2p states that are bound to titanium 3d orbitals. The conduction band consists of titanium 3d orbitals which are involved in an antibonding interaction with oxygen 2p orbitals [58]. The upper valence bands can be decomposed into three main regions: the ␴ bonding in the lower energy region mainly due to oxygen p␴ bonding; the ␲ bonding in the middle energy region; and oxygen p␲ states in the higher energy region due to oxygen p␲ nonbonding states at the top of the valence bands where the hybridization with d states is almost negligible. The contribution of the ␲ bonding is much weaker than that of the ␴ bonding. The conduction bands are decomposed into titanium eg (>5 eV) and t2g bands (
Lihat lebih banyak...

Comentários

Copyright © 2017 DADOSPDF Inc.