THE USER-FRIENDLY FIRE-FIGHTING DOSING SYSTEM 1. EASY TO INSTALL 2. EASY TO USE 3. ECONOMICAL
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM
1. EASY TO INSTALL • Driven by the water flow only. • Compact and with comparably low weight. • No additional parts or external energy needed.
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM
2. EASY TO USE •
Simple mechanical self-regulating system.
•
Wide flow and pressure range.
•
No calibration needed.
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM
3. ECONOMICAL •
Accurate proportioning - optimum use of foam concentrate.
•
Easy maintenance, easy regular testing.
•
Low life-time cost.
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM
For fixed installations
For mobile use
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM In industrial applications
Installed in Fire Trucks
For use in Fire Brigades
Adaptable for customized applications
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM
• The dosing is proportional to flow rate and virtually
independent of pressure variations. This gives a steady admixture.
• Available in different flow sizes; from 400 up to 12.000 lpm, with fixed dosing alternatives; 0,5%, 1%, 2%, 3% or 6% or selectable. • Consists of a robust hydraulic water motor and a strong
industrial gear pump, both of displacement type, linked mechanically by a direct drive coupling.
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM
Function principle The water flow goes through the FIREMIKS water motor. This generates a circular rotor motion, transferred to the gear pump over the direct drive coupling. The concentrate is pumped into the water motor outlet, where dosing occurs. Since the water motor and the gear pump are directly connected, the system is flow-proportional. Dosing is automatically adjusted from the amount of water that passes through the FIREMIKS.
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM
The water motor rotor has 8 or 10 working wings, this gives an early and stable volumetric function of the water motor, within the ratio 1:10 of max flow. (For example 240 – 2.400lpm). This narrow interior design, along with low friction wings, also reduces noise level and creates long lasting durabilty.
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM FIREMIKS works with all common types of nozzles, among others: low expansion, medium expansion and high expansion nozzles, foam sprinkler heads, spray nozzles, foam monitors and foam chambers.
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM
Fixed Type For fixed installations connected to a foam tank, with gravity feed of foam liquid. Equipped as standard with a Manual air relief valve.
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM Fixed Type
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM Fixed Type – Flow Chart
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM Mobile Type
Mainly used by fire brigades as a handy complement to fixed foam admixing systems. Just connect FIREMIKS to the fire hoses and put down the suction tube into a foam drum, and it is ready to be used!
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM Mobile Type
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM
Mobile Type – Flow Chart
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM
One FIREMIKS – Several nozzles!
With FIREMIKS the fire brigade can rely on a flexible system that easily adapts to different fire fighting situations. One can use several different nozzles at the same time, positioned at different lengths and at different heights from FIREMIKS.
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM
Suitable for Offshore/Salt water applications FIREMIKS is available with the water motor made in bronze, to make it suitable for offshore, shipping and other installations where seawater is used. The foam pumps are made of bronze as standard.
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM
Sprinkler units FIREMIKS is available with piston/plunger pumps specifically suitable for sprinkler system with low start up flow and/or high working pressure, also for concentrates with low viscosity, for example wetting agents.
THE USER-FRIENDLY FIRE-FIGHTNING DOSING SYSTEM NFPA Conformity - CE-Marked - ISO 9001-certified We certify that all our FIREMIKS®-units conforms with applicable parts in NFPA 11 (2010) and NFPA 1901 (2009) FIREMIKS is CE-marked. We declare that all our FIREMIKS®-units conforms with European Directive 2006/42/EC. We offer also the possibility to deliver any FIREMIKS®-unit with a third party inspection report by Det Norske Veritas/GL or Bureau Veritas, at a minor additional cost.
Firemiks AB is certified against ISO 9001 by Bureau Veritas.
Firemiks AB – A family company in third generation
Originally founded in 1979 - as a Swedish family based business Firemiks AB is operated by the third generation. Throughout the years, our main focus has been to develop, manufacture and distribute our product line of water motor driven dosing systems worldwide. With more than 30 years of experience of the international fire-fighting market - Firemiks AB is a company to count on!
Firemiks AB | P.O. Box 8155 | 104 20 STOCKHOLM | Sweden Phone +46-8-551 196 10 |
[email protected] | www.firemiks.com
